SC02LUH
MOT: Not validGB
·Last updated 3 months ago
Vehicle Overview
Technical Details
Environmental Impact
Status & Compliance
Data provided by DVLA
MOT History
Vehicle testing history with 8 MOT tests
Understanding MOT Defect Categories
Total Tests
8
Passed Tests
5
Failed Tests
3
Latest Test
Passed
Passed - 29 October 2010
MOT Test at Unknown
Mileage: 95,934 mi
Expires: 05 November 2011
Advisory Notices:
- Advisory Front Exhaust has a minor leak of exhaust gases (7.1.2)
- Advisory Offside Front Tyre worn close to the legal limit (4.1.E.1)
Failed - 23 October 2010
MOT Test at Unknown
Mileage: 95,679 mi
Major Defects:
- Major Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Major Nearside Front coil spring fractured (2.4.C.1a)
Advisory Notices:
- Advisory Exhaust has a minor leak of exhaust gases (7.1.2)
Passed - 06 November 2009
MOT Test at Unknown
Mileage: 84,124 mi
Expires: 05 November 2010
Failed - 23 October 2009
MOT Test at Unknown
Mileage: 84,097 mi
Major Defects:
- Major Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
- Major Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
- Major Front Exhaust has a major leak of exhaust gases (7.1.2)
- Major Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
- Major Brakes imbalanced across an axle (3.7.B.5b)
Advisory Notices:
- Advisory Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Passed - 25 October 2008
MOT Test at Unknown
Mileage: 74,493 mi
Expires: 25 October 2009
Passed - 26 October 2007
MOT Test at Unknown
Mileage: 65,730 mi
Expires: 25 October 2008
Advisory Notices:
- Advisory Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Passed - 09 August 2006
MOT Test at Unknown
Mileage: 50,527 mi
Expires: 08 August 2007
Failed - 09 August 2006
MOT Test at Unknown
Mileage: 50,527 mi
Major Defects:
- Major Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
- Major Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)